Bambu Lab P1 / X1 / X1C / X1CC Filament Spool Switcher & Winder if you use AMS 2nd Video: Issues скачать в хорошем качестве

Bambu Lab P1 / X1 / X1C / X1CC Filament Spool Switcher & Winder if you use AMS 2nd Video: Issues

Purely mechanically controlled filament winder for Bambu Lab P1, X1, X1C or X1CC 3D Printer. It is online now on printables.com: https://www.printables.com/model/4076... First video here:    • Bambu Lab P1 / X1 / X1C / X1CC Filament Sp...   Current issues: 1. The slide is not centered (too far left) - done, already corrected 2. The carriage movement is 2-3mm too far - done, already corrected 3. The PFE hose is too soft, needs to be guided better - todo 4. The original Bambu Lab rolls have a nob (for what?), this must be cut off - done, already corrected 5. The original Bambu Lab reels have no hole to thread the filament (needs to be drilled, 2mm drill) - there is many better spool holder on printable 6. The slide has too much play - todo 7., The slide is too soft. - todo Already solved: 1., Accuracy for bores, shafts, gear sizes, distances between the gears is optimized. (*new version*) 2. All parts can now be printed without support. (*new version*) new version - coming in the next video, before release, before the weekend, 02/26/2023.