Vortex High Speed Machining in Steel - Röders RXU 1200 Quadroguide скачать в хорошем качестве

Vortex High Speed Machining in Steel - Röders RXU 1200 Quadroguide

Vortex is Delcam's latest patent pending high speed roughing technology. Vortex controls the maximum engagement angle of the cutter in the material, such that the angle calculated for the programmed step over is never exceeded, even in internal corners. This allows for optimal cutting conditions to be maintained throughout the toolpath. By controlling the maximum engagement angle and the load on the tool, Vortex can take deeper cuts than traditionally used in roughing operations. Depths of cut up to the full flute length enable maximum material removal rate from solid carbide tooling and reduce machining times by up to 60%. Vortex technology can be applied to 2 and 3-axis roughing, positional 5-axis roughing and for rest roughing. In comparison, when conventional roughing the feed rate is often reduced in internal corners to compensate for the increased engagement angle which in turn increases the forces on the tool. Reducing the feed rate leads to longer machining times. To find out more: Visit our Website: http://www.vortexmachining.com Visit our Product Learning Zones: http://www.delcam.tv/LZ Like us on Facebook:   / delcamams   Follow us on Twitter:   / delcamams