Turck: IO-Link: How to configure your IO-Link Sensor скачать в хорошем качестве

Turck: IO-Link: How to configure your IO-Link Sensor

In this video, we will teach you how to configure an IO-Link sensor using Pactware and a USB IO-Link master. Video Transcription: In this video we will teach you how to configure an IO-Link sensor using Pactware and a USB IO-Link master. You'll need an IO-Link sensor (in this case we're using an IO-Link Uprox 3 sensor), a USB IO-Link master, a double-ended four-pin M12 cordset, and a laptop or PC. First, let's download Turck Software Manager. You can do this by going to www.turck.com/tsm. On the page, scroll down and click the download link for Turck Software Manager, and follow the prompts. The download process typically takes 1 to 2 minutes. With Turck Software Manager downloaded, click the plus symbol next to the IO-Link button, and check the following selection boxes: FTT frame application Pactware, DTM for IODD configurator, DTM for USB IO-Link master 1.1. For adding IODDs manually, you'll also select the IODD library for the series of IO-Link sensor you are using. In this case, we're using the Uprox series of IO-Link sensors. Lastly, you will click the download button. With the necessary components installed, open the IODD DTM configurator. Select "Add IODDS" and "IODD finder". Select Hans Turck Gmbh. Select the series of IO-Link sensor that you'll be configuring. In this case, we are configuring the IO-Link Uprox Bi20U-M30-IOL6X2-H1141. We now have all of the necessary software. Using the M12 cordset, plug the Uprox3 IO-Link sensor into the USB IO-Link master. Then, plug the USB IO-Link master into your PC using the USB cord. Now let's configure the sensor. To configure the sensor in Pactware, open Pactware. Click "Device", "Add Device", and in the popup window select "IO-Link USB Master 2.0". Then select "OK". In the project window, right click on the IO-Link USB master, then select "Add Device". In the popup window, select the IO-Link product series for the device you are trying to configure. In the project window, right click on the product, and select "Connect". Once again, right click on the product and select "Parameter". The parameter window will open. Here is where we change the IO-Link device configuration. To read the current configuration of the sensor, select the "Read from the Device" button. In this example, we'll change the sensor to have 60% of the rated operation distance, and an NPN switching output. To store the sensor configuration into the device, select "Write to Device". We're all set. The IO-Link device is now configured. The sensor can now be disconnected from the IO-Link USB master. You can save your Pactware device configuration to upload into other sensors by clicking File, Save As, and then selecting the location where you'd like to save it. Thanks for watching ติดต่อเราได้ที่ www.facebook.com/TurckBannerTH thailand@turckbanner.com 02 116 5699