Hitachi 15-gauge Angled Finish Nailer NT65MA4 Review скачать в хорошем качестве

Hitachi 15-gauge Angled Finish Nailer NT65MA4 Review

Recently we took the Hitachi 15-gauge angled finish nailer,NT65MA4  to our jobsite to review. Historically we have used 16-gauge finish nails on our trim work. 16-gauge finish nailers have a smaller diameter and generally smaller and lighter nailers. 15 gauge nailers boast greater holding power, were heavier, and to be honest – we’ve never really used them much. The Hitachi NT6MA4 is a lightweight pneumatic nailer that requires oil occasionally, to keep the tool lubricated and functioning at optimal levels. It weighs 4.4 lbs. and operates on 70-120 PSI. Capacity The Hitachi 15-gauge angled finish nailer, accepts 15-gauge nails [34-Degrees] ranging in length from 1-1/4 inch to 2-1/2 inch. We normally use angled nailers and liked that the Hitachi angled magazine allows the nailer to fit in tight corners and spaces. We found the nailer easy to load, its rear-loading, magazine has cut-outs to monitor the nail feeder and the magazine accepts 100 nails. A tool-less, easy-to-clear nose for quick nail extraction should a nail jam during use.