Limp Cable, Limp Performance - Anker Nano USB-C 240W Cable Review скачать в хорошем качестве

Limp Cable, Limp Performance - Anker Nano USB-C 240W Cable Review

The Anker Nano USBC 240W charging cable is one of the limpest cables I own. Personally, I found it way too limp for my liking... Get your own Anker Nano USB C Cable 240W 3 ft Flexible Multi-Color Braided Cord Fast Charging Type C Charger by using this link: https://mreh.ca/3ZCZ6hC This is an Amazon affiliate link that will bring you to the right Amazon store for your location #ReviewerNotInfluencer #Reviews #iPhone In this video: 0:00 Intro 0:18 Design 0:45 Charging Speeds 1:04 Data Speeds 1:18 Durability 1:39 Post Bend Testing 1:51 Should You Get It? Anker Nano USB C Cable 240W 3 ft Flexible Multi-Color Braided Cord Fast Charging Type C Charger Review -Really, really flexible, almost too flexible -Good looking cable (if there was such a thing) -plastic head with a metal band -Several different colors which helps with organizing OR if you really like purple -for charging, it had trouble hitting the 15W protocol, everything else had no issue -One of the read tests was 7 MiB/s, really low -failed 2 out of 3 on first pass, 1 out of 4 on second -I honestly was expecting more from Anker -Voltage drop was around .81 in my test which is higher than the average of .69 -resistance in the cable was also higher, around .24 with the average being .21 -now despite being rated to 240W, the Anker Nano only USB2 transfer speeds -large file data transfer speeds were nothing to rave about, 26 MB/s write, 30 for read which is average -for my 1GB and 5GB mixed file transfers, I got write speeds of 25 MB/s for write and 40 and 31 for read -which is a bit of red flag because the trend is that the 5GB mixed file speed is usually higher than the 1 GB -The Anker Nano did not fare well in my after bending tests -For charge tests, it failed multiple times, only 1 was stable to start but the test completely failed -from that one test, it showed the cable suffering a voltage drop of 6 V which is far cry form the a.69 average -and the resistance in the cable went from .24 to 1.32 -BUT here's where it get's messed up more -my Data tests worked... -the write speeds were 1 higher than before, the read speeds were the same -for the 1gb mixed folder, read speeds went from 40 to 944 -for the 5gb mixed folder, write speeds were the same -so MY guess is that the chip in cable got damaged and the throttling that Anker put on it came off? -wild General Testing Procedure: Data: Data speeds were tested with a Samsung T9 Portable SSD connected to a M1 Mac Studio Tested 1, 5, 20 GB sized files and 1, 5 GB folders containing mixed files Data speeds were measured using fio Charge: Charge speeds were measured using a 140W Apple Charger, a PowerZ KM003c and a Siglent Eload Charge speeds measured across 15, 27, 45, 60W rates Bends: Bends were tested on a custom built bending platform Cables were bent to 90 degrees repeatedly, no pause at each bend Cable wasn't hard clamped, it was held in place by a channel in the platform to allow for a bit of twisting