Degassing Ultrasonic Cleaning Solutions скачать в хорошем качестве

Degassing Ultrasonic Cleaning Solutions

http://blog.sonicsonline.com/blog/bid... 00:10 Today we're going to be talking about degassing 00:15 Why you need to degass your cleaning solution 00:28 How to degass your tank 00:34 Length of time to degass solution 00:40 Step by step instructions 00:50 Before and after comparison Today we're going to be talking about de-gassing, what it is, and why you need to do it to get the best performance out of your ultrasonic tank.When you fill your tank with fresh cleaning solution, that liquid has a lot of air trapped in it. So long as it's in there, you'll be using ultrasonic energy to drive it out instead of cleaning your parts. The solution is to de-gas your tank, by running the ultrasonics and heat for 3-8 minutes before you put your parts in. The time needed will vary depending on your tank size and power level. Simply fill your tank with hot water, or run the heat to get it up to cleaning temperature. Then turn on the sonics just as you would for cleaning. Let's take a look at the difference in this Gemoro 2.6. Here we are with fresh solution. Notice the bubbles and the lack of surface action. Now let's take a look after 3 minutes of de-gassing. What a difference! Remember to do this every time you put fresh solution in your tank. Subscribe now to Sonicsonline: Check out the official site: http://www.sonicsonline.com Connect with us: Facebook:   / sonicsonline   Google +: https://plus.google.com/u/0/b/1122261... Twitter:   / sonicsonline   Pinterest:   / sonicsonline