2021+ Telsa Model S Plaid Electric Frunk Install (EVOffer) скачать в хорошем качестве

2021+ Telsa Model S Plaid Electric Frunk Install (EVOffer)

EVOffer Electric Frunk (UNOFFICIAL) Installation Video 2021+ Refresh Tesla Model S Plaid / LR - Variant C Link to product used in video: https://evoffer.com/product/model-s-electr... Link to official installation manual from EVOffer: https://evoffer.gitbook.io/evoffer-install... ================================================== Chapters: 00:00 Introduction 00:42 Removing all the parts 03:15 Replacing the struts 05:44 Replacing latching mechanism 11:24 Connecting all the wires and control unit 15:27 Initializing the system 17:00 Putting back all the parts 19:46 Final Test / Demo ================================================== Tools needed for installation: Small flathead screwdriver 10 mm hex socket Electrical tape Wire stripper/cutter ================================================== Troubleshooting Tips: If frunk isn't closing after you finish all the wiring, make sure you initialized the system by holding the button on the control unit until it beeps once. If frunk closes, but then pops back up or doesn't latch, you may need to adjust the latching mechanism. Loosen the 2 screws and move the latch up a couple millimeters, tighten the screws, and try again (with the frunk tub put back in place). If the frunk closes and latches, but is slightly higher than the fenders and leaves a gap, you can try adjusting the latching mechanism down a couple millimeters. ================================================== DISCLAIMER: This video is meant to be a supplement to the official instructions provided by EVOffer. These modifications and instructions have not been reviewed or approved by Tesla or EVOffer. Please follow these instructions at your own risk. By following these instructions, you are agreeing to the following terms: You understand that there is the risk of irreversibly damaging your car and/or any other materials involved in the installation. Some modifications to your car may not be reversible, and you may void your warranty. I will not be responsible for any injuries, deaths, financial losses, or damages to property resulting from following the instructions provided in this video (or any associated materials or links).