TOPCON Solar Technology Explained скачать в хорошем качестве

TOPCON Solar Technology Explained

#topcon is the Tunnel Oxide passivated contact technology that Fraunhofer Solar Energy Institute Germany developed in 2013. It reduces the electron recombination rate at the surface, improving the cell’s overall efficiency. Benefits: 1. Highest efficiency of 26.89%. The solar panels can produce enough power in a limited space. 2. Immune to LID effect The advantage of an N-type cell over a P-type is that it is more immune to degradation in sunlight. The N-type solar cell has a minimal quantity of Boron dopant. Therefore, it is immune to Boron-Oxygen complexes that form in the presence of sunlight. 3. Lower Temperature coefficient of power less than or equal to 0.3%/⁰C P(max) = 500 watts (STC) Cell temperature = 65⁰C Power Loss = (cell temperature - 25⁰C)* temp. coeff. of power = (65⁰C - 25⁰C)* 0.3%/⁰C = 40⁰C * 0.3%/⁰C = 12% of P(max) = 12% of 500 watts Power Loss = 60 watts 4. Better bifacial gain 2% more power gain than PERC solar panels 5. Better Performance Warranty less than or equal to 1% in the first year and less than or equal to 0.4% till 30th year 6. Similar Production line PERC production line can be extended. Hence financially attractive. Top TOPCON Solar companies LONGi Trina Jinko Jolywood Fraunhofer-ISE Hanwha Q-cells Canadian Solar REC Solar RENA technologies GmbH AE solar Challenges: The TOPCON solar cell requires a good amount of silver to make contact with the cell. The increased use of silver leads to the higher manufacturing cost when compared to the PERC technology. Another challenge is to keep the Passivation technique effective at higher temperatures. To make the contacts fused properly with the solar cell, a high temperature is required. However, this may lead to oxide breakage, and the recombination rate increases, reducing the efficiency of the cell. Therefore, a trade-off is achieved between the efficiency and the open circuit voltage of the solar cell. Conclusion: Recently, Jinko Solar also announced that it has achieved a maximum solar cell conversion efficiency of 26.89% of its 182 mm N-type monocrystalline TOPCON solar cell. The solar industry is transitioning towards the latest N-type technologies such as TOPCON, HJT, and IBC. The HJT and IBC are also exciting and amazing technologies with very high efficiencies. But they require new production lines, increasing the manufacturing cost. Hence affecting their financial feasibility. Whereas TOPCON technology can be developed with slight modifications to the existing PERC solar cell production line. Hence financially attractive. Thank you for watching the video. Kindly subscribe to the channel for more interesting updates. All videos are for educational purposes. Kindly take professional advice before making any decision on renewable and green energy. https://solarwithyash.com/ https://solarwithyash.com/blog/ https://solarwithyash.com/solar-feasi... https://solarwithyash.com/online-sola...