How To Install A SAT TV SOCKET Onto Coax Cable скачать в хорошем качестве

How To Install A SAT TV SOCKET Onto Coax Cable

This video shows you how to install a satellite wall plate and connecting to a coaxial cable. This is perfect for when you want to neaten up your TV system or have flexibility if you're likely to move the TV around the room. The tools you will need: 1x sidecutters 1x Stanley knife or utility blade 1x small flat-headed screwdriver Parts you will need 1x satellite wallplate coaxial cable Step by step 1) Using the cable cutters . cut the coaxial cable to the correct length. This needs to be short enough so that the wall plate can fit into the back box. 2) Using the utility knife, perform a small incision around the outside of the PVC jacket around 1.5cm or half an inch away from the end of the cable, forming a ring and remove. Exposing the cable braid and screen. 3)Fold back the cable braid and remove the screen. 4) Around 0.5cm or 1/6 inch, using the utility knife cut back the dielectric exposing the center conductor. 5) Loosen the screws on the wall plate and insert the center conductor into the center screw down terminal. 6) Tighten all screws so that the center conductor and ground shield (braid) are making a secure connection. 7) Screw wall plate into back box. For more information on terminating coaxial cables into similar wall plates/ wall jacks for TV aerial connections. Please watch this video:    • How to terminate a coaxial cable into a wa...   To prepare the F connectors required to connect into the front of the wallplate, please watch this great DIY video.    • How To Fit An F Connector Onto A Coaxial C...   For more aerial and satellite information, please visit: https://www.smartaerials.co.uk