У нас вы можете посмотреть бесплатно RC - syma x1 frame quadcopter micro FPV setup или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
I have nano qx control unit on it. For camera mount I used depron foam(http://www.depronfoam.com/depron-foam...) and balsa plywood glued with epoxy, I also use cyanoacrylate glue but not in this type of foam, it will damage it. The batteries connection-adapter cable is very simple. The 600mAh battery fits well in Syma tray, in my case I removed the plastic part with the battery connector so I could fit/glue the camera mount, no cable mod here. The 160mAh battery gives power to camera and transmitter, camera drains about 300mAh and tx about 120mAh. I used pico plugs (http://hobbyking.com/hobbyking/store/...) one input from battery two outputs for tx and camera. Camera's battery plug has reverse polarity according to the colors and battery (red+, black-), and tx have these "pinouts" http://fpvhobby.com/img/p/21-512-thic... There is one more DIY adaptor cable, micro usb, that outputs the video signal from camera to tx and again I use a pico plug. More information for this you can find on rcgroups.com. parts: -808 #16 v2 keychain camera without battery and without case. -10mW 5.8gHz micro transmitter -DIY camera mount -blade msr battery mount, cut to fit(for 160mAh lipo) -nanotech 600mAh 1s lipo for quad -160mAh 1s lipo for camera and transmitter I have more than 5 min flight time. 81grams is total weight. 17grams of that are camera, transmitter, cables and the extra 160mAh battery. There is live video feed and 720p recording from the camera. Thanks for watching! t/x: http://www.fpvhobby.com/transmitter/2... camera: http://www.rcgroups.com/forums/showth... test video: • Видео • Видео • micro fpv t/x FAIL - keychain 808#16 (new) anti-vibration mount: • RC - DIY anti-vibration mount for micro qu... ----------------------------------------------------------------------------------------------------------- Buying stuff from following links I will receive a small commission at no cost for you: Quadcopters: https://www.banggood.com/search/quadc... action cameras: http://www.banggood.com/search/action... fpv gear: https://www.banggood.com/search/fpv/0... https://www.banggood.com/search/5.8g/... ----------------------------------------------------------------------------------------------------------- If you like my content and want to see more like this, subscribe here: / @openhw6445 ----------------------------------------------------------------------------------------------------------- Thanks for watching!!!