How to make Jinbei, a two-piece set with pattern & sewing machine скачать в хорошем качестве

How to make Jinbei, a two-piece set with pattern & sewing machine

item page https://wkimono.tokyo/index.php/jinbe... Purchase pattern and download https://buy.stripe.com/8wMcQB8cJ6Jq8U... Email support on inquiry or trouble [email protected] Let's share your work   / 209844911823511   Steps =================================== Order Work 1 Pre-wash the fabric. ・Fill a basin with water and fold the fabric in a zigzag pattern before soaking it. ・Remove from water and dry. ・Iron while slightly damp and store it. 2 Print the pattern. Cut off one side of the pattern's seam and connect with tape. Cut along the seam allowance line. 3 Place the pattern on the fabric and secure with pins. 4 Cut the fabric along the outer seam allowance line (dotted line). Leave 3mm at the collar-shoulder-space and make a cut. 5 ※Start of upper body work Sew the left and right collars together at the center. Press the seam allowance open. 6 Fold the back center of the body with the pattern and sew it by tucked seam (straight stitch with machine). 7 Press hem slit seam allowances of the body with an iron to create a triple fold. 8 Press the sleeve's cuff of both sleeves with an iron to create a triple fold. 9 Press the seam allowance and center fold of the collar with an iron. 10 Press hem under-collar seam allowances of the Okumi with an iron to create a triple fold. 11 Press the seam allowance and center fold of the ties with an iron. Remove the pattern from the ties. 12 Finish the seam allowances of the body's armholes sides Okumi attachment with zigzag stitch (or overlock). Remove the pattern only for sewing, then reattach after sewing. 13 Finish the seam allowances of sleeves' under-sleeve armholes with zigzag stitch (or overlock). Remove the pattern only for sewing, then reattach after sewing. 14 Finish the Okumi attachment seam allowance with zigzag stitch (or overlock). 15 Sew the ties with a straight stitch following the ironed folds. Stitch length: 2.5mm at the ends and 5mm in the middle. 16 Overlap the left and right Okumi on the front body, unfold the triple-fold seam allowance, and secure with pins. Sew together with the pattern. 17 Align the sleeve mountain with the shoulder mountain and overlap the sleeves on the body, securing with pins. Sew together. 18 Open the sleeves, fold at the shoulder and sleeve mountain, and fold right sides together. Match the side positions and secure with pins. Roll up the sleeve attachment to avoid overlap. Place a tie on the right side. Sew the sides together with the tie. Stitch length: 2.5mm at the tie and 5mm elsewhere. 19 Sew the tie to the left body's tie attachment seam allowance. 20 Unfold the triple fold at the sleeve openings, match under-sleeve , secure with pins, and sew together. 21 Remove the pattern from the body, Okumi and sleeves 22 Finish body's hem body's slit Okumi hem Okumi's under-collar sleeve's cuff with a triple fold and straight stitch (can be blind-stitched). 23 Turn the body inside out to the right side. Align the collar attachment in a straight line. 24 Remember the front and back collar sides, then remove the pattern from the collar. Align the front collar with the back center of the body and secure with pins. Sew together with a straight stitch. Stitch length: 2.5mm at the collar-shoulder-space and 5mm elsewhere. 25 Fold the collar ends in opposite directions and sew 1cm from the collar tip with a straight stitch. This prevents the seam allowance from protruding after completion. 26 Fold the collar as pressed, and secure the back collar and body with pins without piercing the front collar. 27 Sew the back collar to the body from the front side with a straight stitch (can be blind-stitched). Stitch length: 2.5mm at the collar-shoulder-space and 5mm elsewhere. 28 Use the collar pattern to measure the length from the collar tip to the tie attachment point, secure the tie with pins, and sew. ※ Upper body completed 29 ※Start of lower body work Press waist hem of the front and back pieces with an iron to create a triple fold. 30 Press the two pockets in half vertically with an iron to create a fold. 31 Finish the left and right seam allowances of the front and back pieces with zigzag stitch (or overlock), removing the pattern partially. Reattach pins after sewing. =================================== The remaining instructions are included in the manual attached to the pattern.