How to clean and replace the sifter mesh | Fuse Sift скачать в хорошем качестве

How to clean and replace the sifter mesh | Fuse Sift

Clumps of powder can accumulate in the mesh screen below the surface grate, eventually preventing reclaimed powder from passing through to be collected. Perform regular checks on the mesh by lifting the grate, and clean the sifter mesh after every 20 hours of use. For reference, the sifter automatically turns off after 30 minutes by default, so 20 hours of use represents at least 40 full sifting cycles. Formlabs recommends replacing the sifter mesh after every 200 hours of use. For reference, the sifter automatically turns off after 30 minutes by default, so 200 hours of use represents at least 400 full sifting cycles. Follow this step-by-step guide to replace the vent filter on your Fuse Sift unit. #formlabs #fuse1 #fusesift #3dprinting #maintenance #sls Chapters 00:00 – Intro 00:43 – Preparing for the procedure 01:07 – Checking the sifter mesh 01:37 – Vacuuming the sifter mesh 02:20 – Brushing the sifter mesh 03:01 – Replacing the sifter mesh 03:35 – Outro Take our Troubleshooting Resource Survey so that we can make even better resources for you: https://tally.so/r/mK4Rkg ▬ Learn More ▬▬▬▬▬▬▬▬▬▬▬▬▬▬ 📄 Full articles: https://support.formlabs.com/s/articl... https://support.formlabs.com/s/articl... https://support.formlabs.com/s/articl... 📄 Additional Fuse Sift maintenance guide: http://bit.ly/45PgD9G 📕 Explore all Formlabs support resources: https://bit.ly/4jRARnS Music track: First Time by Chill Pulse Source: https://freetouse.com/music Free Background Music (No Copyright)