continuous working rotary charcoal furnace скачать в хорошем качестве

continuous working rotary charcoal furnace

Introduction in real seeing about Mingyang Machinery- Continuously working charcoal making equipment. Rotary caronization furnace. 1, The main body is made of national standard boiler grade carbon steel , and the burning part is made of boiler grade related. 2, The capacity of charcoal output is based on two factors: 1) the humidity of raw materials feedstock; 2) what kind of biomass you use to carbonize. moisture over 15% we will need to use a rotary dryer process. And good mateirials like nut shells, coocnut shells, sawdust, wood chips, wood pieces are giving better result. 3, It's with several parts: 1) feed in mateirals 2) indirect heating 3) 500-600 centigrade pyrolysis 4) water purifiacation to treat the smoke 5) wood gas return to furnace bottom heating 6) continuous discharging ready charcoal( after cooling system). 4, it's rotary with angle of inclination main body. And sprial conveyor to feed in furnace. So yes it's continuously working. And suggusted cycle is working 15 days *24 hours. Then stop the equipment to check each parts and clean up the purifaiction tubes. Then start again 15 days *4 hours. It's using special insulation so enable 500-600 centigrade pyrolysis to get charcoal carbon content 85%. We are designing actived carbon furnace, hopefully be finished 3-5 months later. Other detailed features: 1, it's using liquid gas in bottle to preheat the furnace, then materials will produce flammable wood gas from the smoke treated after purification. Then we can off the external fuel, only use the wood gas will be 4/3 enough for the whole carbonization. 2, And using the draft fan to promote the smoke circulation. 3, Size: dia 2.2m * 12m long, purification system 1m wide* 12m long. 4, Environmental- protective: all smoke sealed inside, and going through the water purification. Contact if you need a big production capacity charcoal furnace.: [email protected] +86-13949068666