LGX Video Guide скачать в хорошем качестве

LGX Video Guide

This is a Bondtech Video Guide focused on the LGX extruder. Take a peek inside, learn how to use it and how to install the different interface plugs that enable the LGX multiple applications. Use it as a bowden or as a direct extruder with Slice Engineering hotends. The LGX is compatible with Copperhead screw-mount; Mosquito; Mosquito Magnum; and Mosquito Liquid. This video guide also includes how to install the LGX For Flexibles Set to create a short filament path print head optimized to print flexible and soft materials. ************************************************************************************************* IMPORTANT NOTICE: ************************************************************************************************* There is a miss on this video guide that will be corrected soon. To use the Direct Drive Interface Plugs with Slice Enginering hotends it is recommended to use a PTFE tube between the extruder and the heat break. Info on how to install it will be posted as a new video. Below is some useful additional information: PFTE tube lengths: Old Mosquito and Mosquito Magnum : 10 mm New Mosquito and Mosquito Magnum : 11 mm Copperhead screw mount : 30mm PTFE tube should be cut straight on both ends. Slight chamfer inside is recommended, but not mandatory. ************************************************************************************************* You can find the Bondtech LGX here: https://www.bondtech.se/en/product/lg... You can find LGX based Upgrade Kits here: https://www.bondtech.se/en/product-ca... Technical Specification LGX™ EXTRUDER e-steps value : 400 on 16 bit micro-stepping setups; 800 on 32 bit micro-stepping setups. Drive wheels : hardened steel; Materials compatibility : abrasive; rigid; semi-flexible; flexible; and soft. Mounting holes : M3 Mounting patterns : bottom anterior (2 points); left (2 points), right (2 points), front (4 points), back (4 points) Holes on the sides of the LGX™ : 5 mm depth Holes on the bottom of the LGX™ : 12 mm depth retraction speed : 35 mm/s retraction distance (bowden) : ~5 mm (0.4 + tube length x 0.15) retraction distance (direct drive) for rigid materials : 0.4 mm retraction distance (direct drive) for soft materials : 3 mm Max operating temperature : 80°C LGX™ DD net weight : 218.6 g LGX™ B net weight : 224 g Package measurements : 80x103x73 mm Package weight : 269 g Download the LGX Technical Drawings her: https://www.bondtech.se/wp-content/up.... CREDITS Soundtrack is based on 2 Bensound cinematic tunes: Adventure; Memories. Check Bensound at https://www.bensound.com/