How to Replace Front Strut Assembly 2009-2010 Pontiac Vibe скачать в хорошем качестве

How to Replace Front Strut Assembly 2009-2010 Pontiac Vibe

Buy Now! New Strut Assembly from 1AAuto.com https://trq.video/ia-1ASTS01090 This video shows you how to install front struts on your 2009-2010 Pontiac Vibe. TRQ Struts are made to fit your vehicle exactly, just like the original part. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly. This repair was done on a 2009 Pontiac Vibe GT 2.4L Wagon 4-Door FWD Manual and the process should be similar on the following vehicles: 2009 Pontiac Vibe 2010 Pontiac Vibe Tools you will need: • Flat Blade Screwdriver https://trq.video/oajx-1AXAA00013 • Pry Bar https://trq.video/ouM-1AXAA00020 • 17mm Wrench https://trq.video/owk-1AXAA00010 • 22mm Wrench • 1/2 Inch Impact Socket Set https://trq.video/ot-1AXAA00263 • 1/2 Inch Impact Socket Set https://trq.video/ot-1AXAA00264 • 10mm Socket https://trq.video/o9S-1AXAA00017 • 14mm Socket https://trq.video/oaiS-1AXAA00015 • 17mm Socket https://trq.video/oaiS-1AXAA00015 • 19mm Socket • 21mm Socket • 22mm Socket https://trq.video/ofI-1AXAA00266 • 30mm 12-Point Socket https://trq.video/oy-1AAST00002 • Strut Spring Compression Tool • Trim Tool Set https://trq.video/oAJ-1AXXX00006 • Locking Pliers https://trq.video/oeW-1AXAA00139 • Ratchet https://trq.video/oarE-1AXAA00016 • Socket Driver • Torque Wrench https://trq.video/oRh-1AXAA00044 • Gloves https://trq.video/omc-1AXSS00048 • Rust Penetrant • Safety Glasses • 5mm Hex Socket • 6mm Allen Wrench • Center Punch https://trq.video/ofB-1AXAA00055 • Floor Jack https://trq.video/oyL-1AXAA00068 • Hammer • Pick https://trq.video/orT-1AXAA00037 • Wheel Chocks Subscribe:    / @trq   Check out our playlist: Pontiac Vibe 2009-2010 2nd Generation:    • Pontiac Vibe 2009-2010 2nd Generation   ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.