Install Exterior Bahama Shutters скачать в хорошем качестве

Install Exterior Bahama Shutters

Step-by-step instructions on how to install Bahama shutters. We walk you through the entire process to mount tropical wood Bermuda shutters on your beach house. How to measure video:    • How to Measure for Exterior Bahama Sh...   Order Shutters: https://www.shutterland.com/exterior-... Order Hardware: https://www.shutterland.com/exterior-... Bahama shutters are built to hang from the top of a window, like an awning, to provide shade to the window. The open louvers allow for filtered light to enter the interior of the home, while protecting the window from the elements. To install, you will need the Bahama shutter, top mounting hinge, shutter stays, installation screws and several basic tools. There are actually two hinges designed for installing Bahama shutters. The hinge shown in this video is the most widely used for to mount the shutter in front of the window. It is simple in design and protects the shutter and the window from the top. The hinge is sold in set lengths, so it will need to be trimmed during the installation. Wider shutters may require more than one hinge. In the video we cut the top hinge slightly long and the bottom hinge slightly shorter. This is so the top channel can be pinched so the shutter can't slide out (which likely won't happen). It is common to trim both sections the same width of the Bermuda shutter. The second available Bahama shutter hinge is used to nest the shutter inside of the window opening. The shutter stays are designed to hold the Bahama shutter in an open position. The pins can be released to lock the shutter in a closed position if necessary. Many homeowners fabricate DIY shutter arms. The component just needs to prop the shutter out from the bottom in the proper location. The store purchased shutter stays come with mounting screws. The top hinge does not. For this installation, we purchased 1.5" screws to secure the top hinge section to the window and 1" screws to attach the hinge to the top of the shutter. Make sure the screws will not corrode (we used stainless steel) and the head is large enough to lock the hinge against the shutter. - Contents of this video ------------------------- 0:00 into 0:23 Bahama hinge 1:31 Hinge installation 2:49 Shutter stay installation