Nova Ultralight 1p Tent Instruction скачать в хорошем качестве

Nova Ultralight 1p Tent Instruction

⛺NOVA setup steps: 1. Fix the tent pole. First, take out the inner tent and flatten it on the ground, and assemble the tent pole; attach the end of the pole to the three bottom corners of the inner tent. The color of the webbing is the same, and then the ball cap at the end of the tent rod is inserted into the groove of the corresponding bottom corner and fixed, Until it makes a squeaking sound. 2. Install the inner tent. Hang the hanging hooks on the inner tent and fix them on the tent pole. 3. Install the overhang support rod. Open the two short support rods on the tent top and fix them to the corresponding plastic parts. (Note: The overhanging rod is located above the main rod) 4. Fix the inner tent. Use the ground stakes provided to fix and set up the bottom corners of the inner tent. Note: If the ground is hard and not Please use a hammer (please bring separately) and large rocks or other heavy objects to fix tent nails when destroying the tent-building site, So as not to damage the tent body. 5. Install the outer tent. Find the opening direction of the inner and outer tents, lay the outer tent on the inner tent first, hang the D-shaped ring (black plastic part) set on the inside of the outer pick rod on the ball cap at both ends of the pick rod, and fix the end of the tent rod with four clamps in turn. (Note: If there is a footprint (accessory), please set it on the bottom of the inner tent before this step.) 6. Fix and adjust the front and rear halls. First, glue the binding pole on the inside of the outer tent, then fix the corner of the inner and outer tents; then, when the zipper of the front hall is closed, pull the front and rear halls to the ground one by one so that the hall is full, then fix it with ground nails, and finally, use the adjustment buckle to adjust the tent shape. If necessary, tie wind ropes and adjust the tension of the tent to make it full. At this point, the tent body is built!