How to build a Farmhouse King Bed with sliding barn doors скачать в хорошем качестве

How to build a Farmhouse King Bed with sliding barn doors

Farmhouse king size bed with sliding doors and drawers This bed was mattress only. If using a box springs, you will need to raise the headboard face 10" thus making the barn doors smaller as seen in the thumbnail picture. Also, using box springs you can space out the middle lattes to 12" instead of 10 for the mattress only. Post legs: 4x4s cut @ 6’ and 21 ¾” X 2 each Side Lattes: 2x10s cut @ 78” X 2 Post leg latte supports: 2x4s cut @ 10” X 4 Headboard back: 1x10s cut @ 89.5” X 5 Headboard shelves: 1x4s cut @ 82.5” X 2 Headboard face: 1x4s cut @ 89.5”, 52”, 82.5” (2), 32.5” (2) Headboard doors: 21.5” X 34” X 2 doors Footboard face: 1x3s cut @ 82.5” (2), 15 ¾” Drawer face: 39” X 15 ¼” X 2 Drawer guts Back guts: 1x3 cut @ 82.5”, 3 feet cut at 3” tall. Width doesn’t matter Side guts: 1x10 cut @ 16.5” X 2 (must sit back 1.5” from the front) Middle guts: 1x3s cut @ 18” X 2 Drawer side: 14 ¼” X 16” X 2 per side Drawer base: 36 3/8ish (measure) Drawer front and back: 36 3/8” x 13” X 2 per side Measure out the trim and follow the same steps as the doors. Lattes: Sides: 2x4s cut @ 60” X 2 Middle: 2x4s cut @ 79 ¼” X 7 Spaced out 10" on center Minwax classic grey stain Brush Kreg pocket hole machine, 1 ¼” screws, 2 ½” screws Torx screws: 1 ¼”, 2”, 3” Links drawer slides https://www.amazon.com/dp/B086RF4LTD?... knobs https://www.amazon.com/gp/product/B07... kreg pocket hole machine https://www.amazon.com/Kreg-Pocket-Ho... Sliding Doors    • DIY Barn Rail