FY silicone Heat transfer silicone HD silicone 3D logo printing silicone скачать в хорошем качестве

FY silicone Heat transfer silicone HD silicone 3D logo printing silicone

FY silicone Heat transfer silicone HD silicone 3D logo printing silicone for heat transfer logo printing To make heat transfer screen printing silicone logo label need prepare: Silicone ink heat transfer printing PET film Heat transfer silicone ink Silicone catalyst Silicone thinner reducer Silicone pigments Silicone crossing linker Silicone hot melt glue Mesh screen Printing table or printing machine For Silicone ink PET films: Two types : one is glossy coating film which print color silicone ink on it will get glossy after heating press on fabric ,another one is matte finish effect after heating press on fabric. If to print silicone ink first on film then glossy or matte effect depends on PET film ,glossy PET film will get glossy silicone effect and matte PET film will get matte silicone effect. If to printing glue first then crossing linker and silicone ink ,then glossy or matte effect depends on if print glossy or matte silicone in on the label top . Mesh number： 120-200 , Mesh(screen film )thickness 0.1-0.2MM,it is depends on printing Artworks. Squeegee：65-80 degree . Silicone ink ,thinner,pigments,catalyst mixing formula & Printing tips: 1st :Color transfer silicone layer printing to print 3-4 layers Transfer silicone FY - 311 100 G Silicone thinner FY- 1# 10-20G 10-20% White and fluorescent colors 20%,others color 10% . Silicone pigment. 10-20G 10-20% Silicone catalyst FY - 600 2-3 G 2-3% Flash by 100-120 degree. 2nd HD transfer silicone layer to print 4-12 layers ,printing times depends on logo thickness that customer needs. Transfer silicone FY - 311 100 G Silicone thinner FY- 1# 10-20G 10-20% Silicone catalyst FY - 600 2-3 G 2-3% Flash by 100-120 degree. If need high density then print more layers 3rd Crossing linker layer to print 2 layers Crossing linker FY - 2901A 50 G Crossing linker fixer FY- 2901B 2.5 G 5% Flash by 100-120 degree. Glue layer FY-HP-01G /02G for 8-12 layers Flash by room temp or by 80-100 degree. 4th After finish printing, bake in the oven by 100 degree for 30 -60 minutes . 5th Heat press the sticker on the heat transfer press machine by the temp of 160-170 degree for 10-15 seconds under pressure of 2- 4KG. TIPS:Kindly doing test before productions every time. If any questions or needs about silicone ink , kindly contact with Belinda +86 15899645234 whatsapp [email protected]