Baofeng UV-5R: Add CTCSS and DCS Codes & Tones On The Keypad And Connect To & Talk On A Repeater скачать в хорошем качестве

Baofeng UV-5R: Add CTCSS and DCS Codes & Tones On The Keypad And Connect To & Talk On A Repeater

Step by step, button by button instructions to program a Baofeng UV-5R and most other handheld Baofeng walkie-talkies and HT GMRS or HAM radios to use DCS and CTCSS codes to connect to and use a repeater by using the keypad, not using the CHIRP programming program. For step-by-step instructions to buy your GMRS license (NO TEST!) see here: https://www.notarubicon.com/how-to-ge... FULL INSTRUCTIONS TO PROGRAM A BAOFENG TO USE A HAM OR GMRS REPEATER AND USE CTCSS OR DCS TONES: Repeater Information You Will Need: Output/Transmit Frequency Input/Receive Frequency Offset CTCSS or DCS Tone Steps To Program And Save: 1. UNLOCK (if locked) - Press and hold # 2. Put into FREQUENCY Mode - Press orange VFO/MR 3. Delete/clear channel to use: MENU, 28, MENU, type CH #, MENU, EXIT 4. Type main/receiving frequency on main screen 5. Save it: MENU, 27, MENU (enter CH to use), MENU, EXIT 6. Enter Input (offset) frequency 7. Enter T-CTCS (TONE): MENU 13, MENU, select tone from list, MENU, EXIT 8. Save it again: MENU, 27 , MENU (enter CH to save), MENU, EXIT 9. Test! #Baofeng #GMRS