240SX S13 Build - Electric Fan Controller Wiring How To скачать в хорошем качестве

240SX S13 Build - Electric Fan Controller Wiring How To

NOTE: I failed to mention that one of the fuse holders was improperly installed onto the RED wire during factory assembly. The fuse holder should be on the BLUE wire and lead to the fan. The RED wire to 12V positive. More than likely there is an entire run of these with those two circuits backwards. https://www.ebay.com/itm/Engine-Cooli... I wanted to be a little more detailed with this install but I've had a kink in the bottom of my neck for a couple days. There will be more to show when the switch panel gets wired in. At least now I have some control over the fans. These controllers are not as preferred as ECU fan control. With the RB20DET coming with a mechanical fan, there wasn't going to be many other options. I've installed a couple of these in the past and although they might be a little finicky to get set, they will turn the fans on and off automatically. Even if for any reason an OEM ECU's fan control failed, one of these controllers could be substituted. Thanks for watching! One more step closer. Some more of the wiring to clean up under the hood and then it's onto the interior wiring. Complete a few things and then diagnose the issues. STAY TUNED!