FIRE! Replacing Lower Control Arm Bushings: 1993 Lexus SC300 скачать в хорошем качестве

FIRE! Replacing Lower Control Arm Bushings: 1993 Lexus SC300

The worn-out, 20 year old, rubber OEM lower control arm bushings and ball joint boots are replaced with ones made of polyurethane on a 1993 Lexus SC300. (please read additional info below) Materials: Polyurethane bushings are made by Prothane Part# 18-207-BL Polyurethane ball joint boots are made by Energy Suspension Part# 9.13130G Synthetic Marine Grease is made by Peak 1/4 #28 Grease fittings are made by Powerbuilt (Tap=1/4-28, using 7/32" drill bit) Important Notes: 1. Before buying new bushings or boots, please check your ball joints for tightness. If your ball joints are bad, it may be better just to go with an entirely new or refurbished LCA. Note: If you go with an entire LCA replacement, the general consensus states: The LCA's from a 1992-2000 Lexus SC300/400 and a 1993-1998 Toyota Supra are ALL INTERCHANGEABLE. 2. Get an alignment after you do this procedure. 3. The general consensus suggests that the bushings used in this video only fit Lexus SC's 1992-1996 (1997+ model LCA's were redesigned with a thicker, reinforced rear lip which lengthens the barrel thus making the bushing from this kit too short). Sources: Torque Specs Information shown in the video were taken from an Official Toyota Factory Service Manual /Technical Information System: Toyota; https://techinfo.toyota.com