daisy 499b accuracy tips -ep.4 скачать в хорошем качестве

daisy 499b accuracy tips -ep.4

499b sights 1) To install the adjustable rear sight correctly, it must slide onto the sight rail. The top screw should not be tightened until the side screws are holding the sight in place. do not use exess tension on the top screw 2) be careful tightening the small side screws. the can and do, twist off or strip out. 3) the sight assembly is fragile and is difficult to repair. have spare sight assemblies on hand. 4)axtreme adjustment of the sight is a warning that some other fundamental problem exists within the gun 5)sight adjustment usually requires 3-5 clicks per scoring ring. (5 clicks on older guns) so, a gun hitting at the top of the 8 riung could require 10 clicks down to hit in the 10 ring. 6) the front dight has interchangable inserts that are included with a new gun. they are in a small brown envolope. 499b trigger 1) excelent instructions for modifying the 499b trigger can be found online: Http://txsmith.net/4hshooting-trigger... 2)there is an old and a new model of trigger assembly. the key difference is a nipple on the new trigger, this helps retain the trigger spring. 3) disassemble the trigger unit for cleaning 4) trigger pull can be reduces by bending the safety pawl spring down so that it is parallel to the rectangular safety hole in the trigger housing. this also makes reassembly of the trigger easier. 5) to install trigger unit, the trigger must be cocked so the safety opening is not obstructed. 6)coach correct trigger control. pull the trigger straight back, avoid exerting side pressure while pulling the trigger.