Growatt Inverter Wifi Monitoring Shinephone App Settings (Dongle SN: XGD4Bxxxxxx) скачать в хорошем качестве

Growatt Inverter Wifi Monitoring Shinephone App Settings (Dongle SN: XGD4Bxxxxxx)

Please make sure Dongle SN starts with XGD4Bxxxxxxx. If XGD5Bxxxx, please check another video. Download pdf Manual: https://drive.google.com/file/d/17re_... Following the video steps, 100% success rate. Also, see the below troubleshooting methods. This video shows an AP-mode connection. A different method compared to the default user manual setting via "Shinephone App" adding Datalogger configuration 2.4gHz method Common question 1: Server Connection lost from Shinephone App If you have NBN, your wifi signal normally has 2.4gHz & 5.0gHz Signal, If you use Shinephone App to auto "counting down" method via the App Configuration, make sure to select the 2.4gHz Network. Example Wifi name "Telstra"or "Telstra-5.0ghz" Common question 2: Datalogger already exist After registering the user name and plant (* Installer Code can be empty, or you can put "AJVTC") Four buttons at the bottom click "Plant"; Then select the plant you created; Click + on the top right. "Datalogger list" make sure your data logger is online. If it's "offline", it means not properly set, you might need to hold it and delete the datalogger first, then add it again. It could also be you have created several different accounts, and have one account already scanned the data logger, you have to delete it from that account first, then login to the account you want to use. Common question 3: Tried both methods, still shows Greenlights constant on. If you tried both methods, including default app configuration & this video's method, and it still shows a Greenlight constant-on. It is time to open your Wireless router setting and configure your router. Just add "2.4ghz Guest network and add a simple password like "growatt001", then configure it with this network. It will work. Common question 4: AP-mode, Growatt Datalogger Setting page - No display / can't log in Turn off your wireless printer, and try again. Or use a browser's incognito mode, or use another device. * remember, Datalogger can only be connected by 1 device, make sure your device is disconnected from the datalogger wifi before using another phone/tablet/laptop to connect. Download the manual for AP-mode: https://1c32ebd1-2dfd-4395-8ccb-490ed...