"Demo..... And Describe How You Would Inspect Your Pushrod Adjustment Assume It Is A Spring Chamber" скачать в хорошем качестве

"Demo..... And Describe How You Would Inspect Your Pushrod Adjustment Assume It Is A Spring Chamber"

Pushrod Stroke Of Any Brake Exceeds The Adjustment Limit ? “Demonstrate and describe how you would inspect pushrod stroke, demonstrate as spring chamber.” ? Reading “Pushrod stroke of any brake exceeds the adjustment limit, is a major defect, I will put it in the book, I will call the operator, and stop driving.” Demonstration Size 24 Short Stroke 1. Release tractor parking brake. 2. Reduce OR build air pressure to 100 PSI (Must be between 90-100 PSI) 3. Ensure engine is stopped and key is back to ‘on’ to keep gauges alive. 4. Take brake chamber tool to identify the size of chamber, and state the size to examiner. “I have a size 24 chamber.” 5. Identify long or short. “I know this is a short stroke because of the circle port.” 6. Make a pushrod reference mark with marker. 7. Place brake buddy onto service brake pedal. 8. Ensure air pressure is still within 90-100 PSI. If below, start engine, and build back to 100 PSI and stop engine again. 9. Measure the pushrod stroke and state. “My pushrod extended __ inch(es), and did not exceed the limit of one and three quarter inches.” 10. *Remove brake buddy and reapply parking brakes.