Front Driveshaft Install скачать в хорошем качестве

Front Driveshaft Install

Watch me remove the stock front driveshaft from my 2008 Jeep Wrangler and put in an Extreme Duty Adam’s Driveshaft! In the past I put a high angle rezeppa joint on my stock front driveshaft to help accommodate my 4.5 inch lift. Now after many fun adventures it’s time for a serious upgrade. On this project I used a 15mm 1/2drive, an 8mm is needed at the transfer case to remove the stock joint, for my situation I used the tool I got with the high angle rezeppa joint I had previously added to my stock driveshaft. A 1&5/16 socket got the stock flange off at the transfer case but a 33mm with a smaller diameter was needed to tighten the new yoke that replaced the flange onto the transfer case. Last I used a 5/16 ratchet box end for the new bolts from the driveshaft to the new yoke at the transfer case. #Adamsdriveshaft #jeepwranglerunlimited #jeepmods #offroad