IMS 4 7 Gallon Tank Install - Yamaha WR250R скачать в хорошем качестве

IMS 4 7 Gallon Tank Install - Yamaha WR250R

The IMS 4.7 gallon tank should give my WR250R over 250 miles of range to help conquer the NMBDR and the COBDR this year. Amazon link to the correct fuel tank below. IMS 4.7 gallon tank for the WR250R: https://amzn.to/3xyBgs5 Steps I followed to install: 00:03 Remove front shrouds and seat 00:37 Unbolt and drain tank 00:56 Disconnect vent hose, power cable, and fuel line 01:21 On CA models connect long vent hose to plastic roll over valve 01:53 Note fuel spigot orientation, remove pump, replace pump O-ring 02:30 Locate lift pump outlet house and cable-tie to stock pump 03:04 Install fuel pump in tank with spigot in original orientation 03:42 Transfer stock front and back mounting brackets onto IMS tank 04:27 Locate vacuum line from throttle body per instructions 05:05 Place IMS tank onto the bike to reconnect fuel line and power cable 05:36 Connect vacuum line from tee or directly from throttle body to back of tank 05:56 Bolt tank to frame using stock bolts 06:21 Transfer seat hook to IMS tank & replace seat 06:59 Tighten front shroud bolts 07:15 Clean tank surface, admire your work, refill tank, check for leaks