How to Replace the Propshaft Centre Bearing on an скачать в хорошем качестве

How to Replace the Propshaft Centre Bearing on an

I have been hearing an annoying bearing noise for over 40,000 miles now, and have had it up on ramps and to various shops to try and find the cause -- which turned out to be the propshaft centre bearing failing. In this warts-n-all video I show how to replace the propshaft/rear driveshaft at home on ramps. It is possible to remove and replace the shaft without dropping the exhaust, but it does require a bit of messing about. There are some important aspects in the video that need to be stressed -- notably, leaving the vehicle in neutral and positioning the propshaft so all the bolts are accessible. Tools Required: 12mm x ⅜" E-Torx (preferably long series) ⅜” short extension (1”) 13mm long series socket 8mm or 10mm socket (heat shield bolts vary in size) ⅜ ratchet (long) ⅜ ratchet (short) Set of ⅜” or ½” drive extensions (around 2’ worth) ⅜” or ½” wobble Blue Loctite 242 Torque Specs: Propshaft bolts to transmission and diff pinion: 31 lbs.ft and 45º Centre bearing bolts: 15 lbs.ft --------- Contents of the Video -------------- 0:00 - Opening Credits 0:26 - Introduction 2:11 - Slight ramble about Land Rover Electric Vehicles 7:10 - Part numbers and cost 12:38 - Tools and Torque Specs 13:25 - Overview of the job 15:50 - Removing the heat shield 18:00 - The propshaft fastenings 20:00 - Removing the propshaft bolts 26:00 - Removing the centre bearing nuts 27:00 - Withdrawing the propshaft 28:22 - The culprit 29:00 - Replacing the propshaft 36:12 - Dealing with the awkward bolt 40:20 - Marking the socket to mark the extra 45º of rotation 41:42 - Ensuring centre bearing alignment 43:53 - Replacing the heatshield 47:16 - Review of the steps plus helpful tips 49:56 - Tools and Torque Specs 58:09 - Outro The intro and outro are from: EEAAEA Performed by: VVibeTrix (Johanna Ahola-Launonen, Maarit Laihonen, Matti Häyry, Mikaela Mansikkala, Satu Haiko) Music: Matti Häyry Lyrics: Matti Häyry Arrangement: Matti Häyry, Mikaela Mansikkala, Lacce Väyrynen Recording: Matti Häyry, Lacce Väyrynen Studio engineering: Matti Häyry, Lacce Väyrynen Producer: Lacce Väyrynen Executive producer: Matti Häyry Mastering: Kesthouse With Permission from: (c) Matti Häyry and Polite Bystander Productions 2019