etrailer | Review of SnapPad RV Jack Pads - EQ Octagon Jack Pads For 10 Inch Octagonal Feet - SN76FR скачать в хорошем качестве

etrailer | Review of SnapPad RV Jack Pads - EQ Octagon Jack Pads For 10 Inch Octagonal Feet - SN76FR

Click for more info and reviews of this SnapPad RV Jack Pads: https://www.etrailer.com/RV-Jack-Pads... Check out some similar RV Jack Pads options: https://www.etrailer.com/dept-pg-RV_J... https://www.etrailer.com Don’t forget to subscribe!    / etrailertv   Full transcript: https://www.etrailer.com/tv-Demo-Snap... Hi everybody. Andy here with etrailer.com and today we're gonna take a look at these SnapPad, EQ Octagon Jack Pads. These heavy duty rubber pads are going to snap onto your Class A, Class B, or Class C motor homes with equalizer leveling systems. And these are going to make leveling faster and easier for you, eliminating the need to crawl under your trailer to position plastic pads or wood blocks. These four pads are designed to fit 10 inch octagonal jack feet. And let me turn this around here and retrieve my tape measure just to give you the overall diameter. So as you can see, we are sitting right at 13 and a quarter inches in diameter. And laying this down, get my tape measure or my ruler rather, make this a little easier to measure the height. We're sitting at almost three inches tall. And I weighed these pads earlier before our time together, and these weigh about nine pounds per pad. So as you know, the increased surface area of your leveling jack's feet is going to provide added support for your trailer preventing sinking into soft ground, unlike smaller metal feet. And these pads are made here in the USA of durable heavy duty rubber that are actually made from recycled tires. Some additional benefits that you are going to gain from using these pads, they're going to grip uneven terrain and prevent your metal feet from rusting or bending. And on your screen, I'm just including a photo there from one of our neighbors who have bought similar pads in the past. And that just kind of gives you an idea of what these are gonna look like on your jack foot and on uneven terrain if you've never used them before. The built-in drains here are going to release moisture to prevent your jack feet from corroding. They're also going to serve as a cushion so your metal feet won't crack or chip away at your driveway. And they're going to help dampen vibration from inside of your motor home that could cause shifting. Now, there's not going to be any need to remove and replace these pads or carry other jack pads or blocks around with you. These are going to be a simple one time installation. You're just going to line up the pads beneath your jack feet and lower each foot until the lip on the pad fully engages and locks in place. You're actually going to hear a snapping sound once the pad is securely installed. Installation is permanent, so once you have the snap pads secured, you're never going to have to worry about crawling under your RV to place pads in place again. Well, that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.