У нас вы можете посмотреть бесплатно DIY Horse Shelter Shade Kit And Stall By Seven Peaks Fence And Barn или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
This is our DIY 10x20 horse stall with a 10x10 shade. Super easy to install and affordable! Watch how easy it is! 10x20 Shade Kit Instructions Step 1: Attach each shade post (4) to the panels using panel clamps provided (12) going from the panel to the post. ** Make sure the L piece on the top of the post is facing inwards. Step 2: Attach front and back Truss to the posts using panel clamps provided (12). ** The truss will rest on top of post and on the Horizontal L Piece. Step 3: Attach the side frame pieces (2) using screws provided (8) Step 4: Attach middle support frame (1) using screws provided (4) Step 5: Make sure structure is square and adjust if needed. Step 6: Make sure all clamps are tightened and screws are in place before moving forward to next step. Step 7: Attach tin (4) to the frame roof using screws provided (30) ** Make sure to overlap the first 3 pieces of tin by 1 and the last one by 2. ** Be sure to use 1 screw in the middle of each large valley on the front, middle and back. ** You can also use the thicker tin to tin screws to connect the overlapping tin. Step 8: Finish setting up the additional panels (3) to complete the stall using panel clamps provided (8) Step 9: Be sure to add an additional post on each corner for extra support and securing it into the ground using panel clamps by either pounding in or concreting it 2-3ft into the ground. Step 10: All Finished! Enjoy! **NOTE** **** THESE SHADES ARE DESIGNED FOR OUR 10X20 STALLS AND ARE NOT INTENDED FOR ANY OTHER USE OTHER THAN WITH OUR PANELS. **** ANY STRUCTURE OVER 200 SQ FEET IS REQUIRED TO GET A PERMIT FROM THE CITY IN THE STATE OF ARIZONA. MATERIAL INCLUDED WITH 10x20 STALL WITH SHADE: 4 – Posts 2 – Trusses 3 – (2)Side/(1)Middle Frame Pieces 4 – Tin Pieces 5 – Panels 1 – Panel/Gate Combo 32 – Panel Clamps 60 – Framing/Tin to Frame Screws 20 – Tin to Tin Screws ⚒️ Tools: Socket Adapter - https://amzn.to/2OZTWJb 11/16 Socket - https://amzn.to/35yzc0K Drill - https://amzn.to/2MKkb3m Gloves - https://amzn.to/2qcUn8m 1 5/8" Panel Clamps - https://sevenpeaksproducts.com/produc... 1 5/8" x 2 3/8" Panel Adapter - https://sevenpeaksproducts.com/produc... ⬇️ Get your Free Estimate today! ⬇️ 👉 https://www.sevenpeaksfenceandbarn.co... Visit us at our locations or give us a call:⬇️ Texas Location: 📍 9601 County Road 1004 Godley, TX 76044 📱: 817-398-5029 Arizona Location: 📍 1037 South Center Street Mesa, AZ 85210 📱: 480-246-6237 🗣️ Be Sure To Follow Us On Our Social Media Accounts: Facebook - / sevenpeaksfenceandbarn Instagram - https://www.instagram.com/sevenpeaksf... #horseshelter #horseshade #horsestall #fencing #horsefence