Sailfin Extruder (For Ratrig V-Core 3) скачать в хорошем качестве

Sailfin Extruder (For Ratrig V-Core 3)

Another lightweight extruder that you can adapt to the EVA carriage on the Ratrig V-Core 3. Based on the original Sailfin Extruder by Wes Cherry: https://github.com/CroXY3D/Sailfin-Ex... CroXY 3D printer with crossing gantries: https://github.com/CroXY3D/CroXY Parts Needed: Printed parts from Thingiverse: https://www.thingiverse.com/thing:511... M3x20mm bolt M3x25mm bolt M3x8mm bolt M3 standard nut (2 EA) M3 square nut Donor parts from BMG-type dual gear extruder You'll also need to cut a length of PTFE tube for the bottom of the extruder. This will vary depending on which hotend you are using. For what it's worth, if you use a Dragon Highflow, you'll need a 19-20mm section of PTFE tubing. For the carriage, you'll need longer M3 bolts than what you currently use with the standard EVA, like 50-55mm.