FreeCAD PCB Milling Tutorial - NEW скачать в хорошем качестве

FreeCAD PCB Milling Tutorial - NEW

Use the Settings-Cog to change Play-Speed and, Set Video Quality as desired... A New PCB-Milling Video (a simplified version) using FreeCAD v21.2) The 1st-Part ends at 5:45 and begins the PCB Milling... Here's a link to my PCB Hold-Down's: https://www.thingiverse.com/thing:470... Because Milling a Front-Side of PCB is Quicker/Easier to setup (no Flipping or Re-Positioning would be needed) the Video shows doing the more difficult, Backside of a 1-Layer PCB. I did Not want to increase the Video's time by either Drilling or Profiling the THT-Holes so, I show doing only the Oblong Holes for the Power-Jack and Mounting-Holes... The 1st part shows creating a Tool-Bit from existing FreeCAD-Stock-Bits then, it moves-on to setting-up/using KicadStepUp Workbench to get the PCB and using Path-Workbench to create G-Code for Milling. Video concludes showing the three Stock-Tool Folders, for reference. NOTE: FYI - You'll see 0.6mm and 0.7mm Endmill Bits in the list - they are Not part of the Stock-Bits - I created those two-bits prior to making the Video (made the same way as shown in Video for 1.5mm Bit) NOTE (Added): The CutMaterial is the 'Result' of the Milling Operation (change Color as desired for clarity) Toggle various item Visibility's to help see and select (on my system, the SpaceBar does this toggling) Yes, you can Select items on the PCB (if visibility is On) and can use Box-Selection method's in Edit-Menu. But, it may Not always be the best approach. Thus, play around with the PCB, Model...etc and determine which works best for you and the particular item of interest Don't let 'Color Bleeding' of other Visible items confuse you (they are only Graphic's), Toggle Visibility's On, Off as needed... And, when Done, if you have STEP Model items on the PCB, you can Keep them and Toggle Visibility to show the Final Results in a nice, clean way for Presentations and Exporting Images... And, ignore my Typo's (I ignore them!) NOTE: It appears the 'Same' process can be used for the next updated FreeCAD version (I hope... I tested it with v22-Pre-Release. Path Workbench will change Name to CAM-Workbench).