Continuity and Firing Current скачать в хорошем качестве

Continuity and Firing Current

The fireTEK modules are constantly monitoring the firing circuits to the igniters. This video demonstrates the Channel Status display on the FTQ module which displays the measured resistance and calculated firing current (up to a maximum of 9.9A) The firing module still maintains the simple Rail Display on the screen, with icons indicating Very Good, Good, Bad, and No Connection that allow the user to check the condition of all 64 or 48 channels in seconds. If you need more detailed information, new with the FTQ modules, the Channel Status display provides measured resistance and calculated firing current. To show the real time monitoring a potentiometer is connected in series with an igniter on a breadboard and the resistance is adjusted showing how the systems indicates a Very Good Connection, Good Connection, and then Bad Connection. Some systems may show good continuity, but there may be too much resistance to firing the igniters. The fireTEK system checks both continuity and firing current, to ensure you have a successful show. Whether you are checking the setup with the Rail Display or Channel Status, there is no constant pushing of buttons to re-test the system - it's automatic and continuous. Check out more at http://www.firetekfiringsystem.com/