ASP SVU (OTs-03as) Disassembly and Reassembly скачать в хорошем качестве

ASP SVU (OTs-03as) Disassembly and Reassembly

Full disassembly and reassembly of the Airsoft Pioneer (ASP) SVU Bullpup Dragunov Sniper rifle. (Up to extracting the Gearbox) My apologies for some of the shot angles and not properly showing the screws, but it should be clear enough where to stick it... the screwdrivers i mean... This is my first video so if you have any tips for me let me know, other than that this is a commented technical instruction video of an AIRSOFT replica and not a real firearm. Of course I couldn't have done this without my Curious Assistant Technician (CAT for short), Luna. Technical information: This far known from the disassembly and reassembly and external sources. (Thanks Justin) Barrel length 640-650mm. CYMA/RS Clone internals. Fire selector has NO functional safety switch (It's Semi, Semi, Full Auto) as explained in video. Easily modified to Semi, Semi, Semi by removal of external switch as explained in video. Motor is a J.G. M93 Torque model. Parts are CAT sensitive (Not shown in video as she stole the parts so often i had to cut those sections out to shorten the length of the video.) Comes with a standard stick size Ni-MH 2/3A 1200mAh 8.4v battery (rough measurements 200x20mm) Other info: Stock Nozzle has some inconsistency in the air seal, advised to upgrade to the RS air seal nozzle (if you can find them) FPS test: average 440 some "hot" spikes of 450-460 (5% of the time) some low FPS shots due to compression failure (can very from 250 - 400 FPS (also around 5% of the time) Most shots are on the mark with FPS, but seeing a sniper model is more for single shots we don't really want those stray under- / overperformers. Another comment from someone that has the SVU, as it's CYMA parts be careful for Early Engagement on Full Auto and burst fire as it can literally rip your piston / gears to pieces. Any questions, place them in the comments and i will try to answer to the best of my knowledge.