2 Fast SCHINDLER Gearless modded Lifts near Berne, Switzerland скачать в хорошем качестве

2 Fast SCHINDLER Gearless modded Lifts near Berne, Switzerland

Timestamps: 0:00 intro 0:26 normal ride 3:42 motor room + shaft pit 8:13 car top / lift shaft These lifts are located in an office building near Berne, Switzerland. They were installed in 1991 upon construction of the building. The building has a very interesting architecture including a lot of glass and open spaces. The lifts are located in a dedicated lift-tower that is connected to the rest of the building via bridges on every upper floor. The motor room is located at the lowest basement -4. All upper floors contain offices. The basement floors -1 and -2 contain a car park that belongs to the building. Floor -4 contains a large storage area. The doorways on floor -3 are boarded up with sheet metal. What lies on floor -3 is unknown. Floors -4, -3 and 4 are usually locked with a keycard. Before the modernisation, these lifts had Miconic B controllers with Dynatron S drives. The bigger lift had a W200 winch, the smaller one a W163. These lifts were modernised by Schindler in 2019, using only generic components. It is a very successful modernisation. The BP408 is a fully CANopen capable controller that communicates with all other components over CAN bus. The ZAdyn drive in combination with the BP408 levels fully intelligent. Interestingly, both lifts have motors from different manufacturers. Both motors are gearless, which enables almost completely silent operation. The lifts running in a combined shaft offers a great view of the cars going up and down. Also the shaft has been covered in wood wool boards for extra acoustic insulation. Many thanks go to ‪@TecStuffLifts‬ for the assistance in the making of this video! Else this footage would not have been possible. Manufacturer: Schindler, 1991 Modernised: Schindler, 2019 Capacity right: 13 persons / 1000 kg Capacity left: 8 persons / 630 kg Type: Traction, 1:1 roping Floors: 10: -4, -3, -2, -1, 0, 1-5 Fixtures: Schaefer RT42 Speed: 1.6m/s Travel height: 32.2m Logic: Böhnke+Partner BP408 Drive: Ziehl-Abegg ZAdyn 4 Motor right: Ziehl-Abegg ZAtop SM250, 10kW Motor left: Sassi G400 T3, 7kW WARNING/DISCLAIMER: DO NOT attempt to copy anything shown in the video without having the proper knowledge of how to do so! LIFT SHAFTS and MACHINE ROOMS are very DANGEROUS places and are NOT MEANT to be accessed by inexperienced or untrained personnel! Dangers in these environments include but are not limited to crushing, electrocution, falling and burns. Recording: Q3 / 2022