FPGA: Exploring Custom JTAG programmer for AMD Xilinx FPGA Part2 Installing Pi pico Driver SDK скачать в хорошем качестве

FPGA: Exploring Custom JTAG programmer for AMD Xilinx FPGA Part2 Installing Pi pico Driver SDK

https://hackaday.com/2022/04/11/need-... https://www.adiuvoengineering.com/pos... https://github.com/kholia/xvc-pico/ mkdir repos cd repos/ git clone https://github.com/raspberrypi/pico-s... cd pico-sdk/ git submodule update --init cd ~/repos git clone https://github.com/kholia/xvc-pico.git cd ~/repos/xvc-pico/daemon su yum -y install cmake cmake . cmake --version CMake Error at CMakeLists.txt:2 (cmake_minimum_required): CMake 3.0 or higher is required. You are running version 2.8.12.2 su yum update wget https://dl.fedoraproject.org/pub/arch... su rpm -Uvh epel-release-7-14.noarch.rpm yum -y install cmake3 cmake3 --version cmake3 . error libusb-1.0 su yum install libusbx-devel make cd ~/repos/xvc-pico/daemon su ./xvcd-pico [root@local112 daemon]# ./xvcd-pico [ERROR] failed to open usb device! cd ~/repos/xvc-pico/firmware export PICO_SDK_PATH=${HOME}/repos/pico-sdk cmake3 . https://developer.arm.com/downloads/-... https://github.com/amitx64/armtoolcha... /home/thoi/repos/arm-gnu-toolchain-13.3.rel1-x86_64-arm-none-eabi/bin/arm-none-eabi-addr2line sudo ln -s /home/thoi/repos/arm-gnu-toolchain-13.3.rel1-x86_64-arm-none-eabi/bin/arm-none-eabi-gcc /usr/bin/arm-none-eabi-gcc sudo ln -s /home/thoi/repos/arm-gnu-toolchain-13.3.rel1-x86_64-arm-none-eabi/bin/arm-none-eabi-g++ /usr/bin/arm-none-eabi-g++ sudo ln -s /home/thoi/repos/arm-gnu-toolchain-13.3.rel1-x86_64-arm-none-eabi/bin/arm-none-eabi-gdb /usr/bin/arm-none-eabi-gdb sudo ln -s /home/thoi/repos/arm-gnu-toolchain-13.3.rel1-x86_64-arm-none-eabi/bin/arm-none-eabi-size /usr/bin/arm-none-eabi-size sudo ln -s /home/thoi/repos/arm-gnu-toolchain-13.3.rel1-x86_64-arm-none-eabi/bin/arm-none-eabi-objcopy /usr/bin/arm-none-eabi-objcopy sudo ln -s /home/thoi/repos/arm-gnu-toolchain-13.3.rel1-x86_64-arm-none-eabi/bin/arm-none-eabi-objdump /usr/bin/arm-none-eabi-objdump cmake3 . make -j4 Erooro for once the UF2 file is available, hold the bootsel boot down as the RPi Pico is powered up and the board will mount in your file system. Simply copy the UF2 file and it will be installed and ready to go.