How to Replace Fuel Pump 2009-2010 Pontiac Vibe скачать в хорошем качестве

How to Replace Fuel Pump 2009-2010 Pontiac Vibe

Buy Now! New Fuel Pump Module Assembly from 1AAuto.com https://trq.video/ia-1AFPU01442 This video shows you how to install a fuel pump on your 2009-2010 Pontiac Vibe. Combustion engines need three things to operate: fuel, air, and spark. If your fuel pump isn’t delivering the fuel your engine needs, it will run poorly, or not at all. Or, the pump is fine, but your fuel gauge isn’t working. Many modern pumps include an integrated sending unit. Either way, a new engineered to fit fuel pump for TRQ is just what you need. This repair was done on a 2009 Pontiac Vibe GT 2.4L Wagon 4-Door FWD Manual and the process should be similar on the following vehicles: 2009 Pontiac Vibe 2010 Pontiac Vibe Tools you will need: • Flat Blade Screwdriver https://trq.video/oaoL-1AXAA00013 • Pocket Screwdriver • 10mm Wrench https://trq.video/oxI-1AXAA00010 • Air Compressor • 3/4 Inch Drive Ratchet • Cloth Rags https://trq.video/ooI-1AXSS00035 • Bucket • Drain Pan Subscribe:    / @trq   Check out our playlist: Pontiac Vibe 2009-2010 2nd Generation:    • Pontiac Vibe 2009-2010 2nd Generation   ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.