ESP32 Tutorial using MicroPython - Let's Get Started! скачать в хорошем качестве

ESP32 Tutorial using MicroPython - Let's Get Started!

Here you can follow along as I set up an ESP32 development module to run with MicroPython, from soldering the headers, to loading the software, to running some LEDs and Neopixels (WS2812Bs). I know it's a long tutorial, but this should be about enough info to get you going, then you can start reading the documentation. Intro: 0:00 Things You Need: 1:28 Setup: 5:30 Soldering: 9:56 Breadboard: 15:52 Install MicroPython: 18:59 Connect USB/Serial: 25:14 Resets: 28:20 Blink LED: 29:10 Load and Run Program: 31:16 boot.py + main.py: 33:10 Un-Connect USB/Serial: 34:00 Using main.py: 36:35 Blink LED Circuit: 38:30 NeoPixels (WS2812b): 41:17 End: 46:00 READ THE DOCS: MicroPython: http://docs.micropython.org Espressif: https://www.espressif.com/en/products... DOWNLOADS: Scripts: https://drive.google.com/open?id=1VTd... COMMANDS: sudo apt-get install python3-pip pip3 install esptool pip3 install pyserial esptool.py --port /dev/ttyUSB0 erase_flash esptool.py --chip esp32 --port /dev/ttyUSB0 write_flash -z 0x1000 esp32-20190125-v1.10.bin sudo adduser myusername dialout (requires reboot) sudo apt-get install picocom picocom -b 115200 /dev/ttyUSB0 use CTRL-A plus CTRL-X to exit python prompt: use CTRL-C to break, CTRL-D for soft reboot from machine import Pin p = Pin(13,Pin.OUT) p.value(1) p.value(0)