Installing a Mirror DashCam on a Jaguar I-Pace скачать в хорошем качестве

Installing a Mirror DashCam on a Jaguar I-Pace

PORMIDO Mirror Dash Cam Front and Rear View Reverse Car Camera,12 Inch Dual Dashcam with Detached Front Camera. Note: you don’t need the optional low voltage protection power supply kit or the GPS kit. link: https://www.amazon.co.uk/gp/product/B... 2. CAMWAY Universal Dash Cam Hardwire Kit 12V-24V to 5V OBD Dash Cam Hardwire Kit. Link: https://www.amazon.co.uk/gp/product/B... 3. 90 Degree Right Angle Mini 5pin USB B Male to Female PLUG Adapter Connector Link: https://www.ebay.co.uk/itm/224502696323 4. A piece of plastic/rubber such as polystyrene cut to 9cm long, 2.5cm wide, sloping from one side to the other to make a wedge so that one side is 2cm thick and the other 1.5cm. This is to stick on the back of the Mirror Dash Cam with double-sided tape and hold the bottom of it away from the original mirror. Tools needed: Blanket and old towels to protect the roof and spoiler Table with a cloth covering to place the spoiler on Extra/spare double-sided waterproof sticky pads (such as “3M VHB”). It is possible to use heavy-duty waterproof (e.g. Gorilla) double-sided tape Wire coat hanger (or similar) with pliers to cut and bend it Black Gorilla tape Insulation tape, preferably black Small hack saw, Stanley knife, and wood chisel to make groves in the plastic of the spoiler Soft faced hammer to use with the chisel and to replace door trim Superglue 4mm gauge to measure the gap when refitting the spoiler Small flat screwdriver to release the high-level brake light connections in the spoiler Washing up liquid (for lubrication of the rubber hose) Cloth/sponge and water for cleaning behind the trim 10mm spanner, preferably box or long socket Wire or plastic cable ties to bunch up excess cable (or you can use the cable tie wires that come with the kits) Baby wipes for removing any marks on the headlining once finished.