STUDY TOUR KUDAL | 2021-2022 скачать в хорошем качестве

STUDY TOUR KUDAL | 2021-2022

DY PATIL SCHOOL OF ARCHITECTURE STUDY TOUR REPORT | 2021 - 2022 BARCH KUDAL | SAWANTAWADI Content: 00:17 Introduction sawantawadi 04:38 Introduction Bhagawati temple 06:17 Bamboo Workshop 11:20 BROLL STARTS On our tour to Sawantwadi. Before we did start with our practical workshop, we were to attend the workshop theory as to know the work we were about to start, keenly. The workshop theory was threw by the KONBAT bamboo factory. They revealed that the bamboos they used were of two type, i.e., the local bamboo (or the locally available bamboos) and the one that transported from the north eastern part. The diameter of the local bamboo ranges between 25-75mm and are also known as manga. Whereas, the northeastern bamboo's diameter ranges from 75-120mm. The scientific name of bamboo is dendrocalamus. Once the bamboos are being selected, it's mandatory to see whether they are straight and if not it can turn out to be number of problems while constructinal work. And once the bamboos are selected, before they're treated it is necessary to remove roots of bamboo and sun dry it. Treatment of bamboo Now the treatment of bamboo betide. The treatment is called the CCB i.e., copper chrome borax treatement. The name of the treatment is in the view of the fact that the chemicals used in it are; COPPER SULPHATE: •Copper sulphate works as an agent that removes starch from the bamboo. •Since we know Removal of starch is very important, as the starch present in bamboo attract insects. But we also have a simultaneous problem occuring because of the treatment i.e., the bamboo gets weaken due to the chemical treatment. CHROME: •Now there comes in the role of second chemical that is chrome. • It acts as a fixing agent. • it makes bamboo stronger and durable It's proven by the FRC-(forest research centre) That this bamboo can be in better condition for next 500 years. And then there is BORAX acting as an antifungal material for bamboo. For the purpose of treatment the bamboos are kept in the cylindrical chambers that are 22ft high for approximately 8 hours. Step done AFTER TREATMENT: AT PRESENT, AFTER THE TREATMENT is done, the very first process is to clean the nodes. Fewer the times, these nodes become impossible to clean henceforth there are the technical help reaching us out to help named as the aegon machine or we can also use a grinder machine. Once we're done with all the treatment and cleaning of bamboo, we start with its use for the construction purpose . BEAMS Beams can be constructed by 2-3-4-16B or many more bamboo. It is all dependent on the type and amount of load we put on. Nut bolts that we generally use to join the two faces of bamboos are of 304 grade. The reason we use them is, they're strong and doesn't gain rust quickly. The standard thickness of bamboo is 80-100mm In cases where not all bamboos are of similar heights and few are shorter. Then the bamboos are joined by the dovel joint. A hard core bamboo that isn't hollow from inside is required that are approximately of same diameter. STEPS TO INSERT A DOVEL. • First of all the small dovels are damped by the fevicol and then are inserted in bamboo at an angle. • Second step, is while to let the dovel remain where it is, at its place we tend to insert the nails at both of the endings of the dovel. These all were the steps learnt during the practical training while we were being watched by the expertise. Thank You for watching , do subscribe and hit the bell icon to get more contents