Iron Transfer Method for SMD (for dummies). Production of double-sided PSB. скачать в хорошем качестве

Iron Transfer Method for SMD (for dummies). Production of double-sided PSB.

Today I will show you how to easily and effortlessly make a payment using the Iron Transfer Method. To work, we will need: acetone, degreaser, alcohol, liquid rosin, iron chloride for etching, ammonia, adhesive Wallpaper, iron, masking tape, non-water marker for coorection of tracks, a tool that you will use to cut glass fiber. The most important thing is what carrier to choose for the toner. Toner is very well kept on the substrate from self-adhesive Wallpaper. It also departs well from them when Ironing with an iron. Take a sheet corresponding to the size of the Board. The sheet is not reused, so the edges of the sheet will go to waste. In my example, I used a sheet of A5 size. It is important that the sheets are not moved diagonally, that is, if, for example, Paget the upper left and the lower right, the picture tracks on the sides of the Board will knock. Do not allow this bias. You just need to do everything carefully. It won't take long. The second important point: when you tape half of the sheet, apply the tape butt-to-butt, not overlap. Otherwise, at the overlap point, the thickness of the tape will be greater and the pressure on the toner will be greater. Try to do it carefully. Put the heating temperature of the iron on two points.