Smart Cruise Control SCC with Stop & Go скачать в хорошем качестве

Smart Cruise Control SCC with Stop & Go

SMART CRUISE CONTROL, or SCC, with Stop and Go is designed to maintain a predetermined distance from vehicles detected ahead by automatically adjusting the driving speed based on certain circumstances. With the STOP and GO feature, when SCC detects a vehicle slowing or stopping, SCC can bring the vehicle to a complete stop. Then, when the vehicle ahead starts to move forward, SCC re-engages. The front view camera, radar, and corner radar detect the lane markings and the vehicle in front of you. When SCC detects a vehicle ahead, it helps maintain the distance from that vehicle and will automatically slow the vehicle to maintain a set distance from traffic, without depressing the accelerator or brake pedal. With Stop and Go, if the vehicle ahead stops for more than 3 seconds, to start moving your vehicle, the accelerator pedal or the PAUSE-RESUME switch on the steering wheel must be pressed. If equipped, SCC will operate based on driving style, such as inter-vehicle distance, acceleration, and reaction speed. To enable SCC and set/adjust the SCC speed, press the DRIVING ASSIST button on the steering wheel to turn SCC on and set it to the current vehicle speed – this is known as a One-Touch Set. Once enabled, the Cruise Indicator will illuminate on the Instrument Cluster. SCC may decrease speed to maintain the distance from the vehicle in front. If you want to increase your speed, press the PLUSMINUS switch up. To decrease speed, press the PLUS-MINUS switch down. The indicator light, set speed and vehicle distance will illuminate on the Instrument Cluster. To Pause or Resume SCC operation – press the PAUSE-RESUME switch. To turn SCC off, press the DRIVING ASSIST button – the SCC indicator on the Instrument Cluster will turn gray. You can also set your VEHICLE DISTANCE from the vehicle in front of you. Press the VEHICLE DISTANCE button on the Steering Wheel, then cycle through the settings. To adjust the sensitivity of SCC, go to the VEHICLE SETTINGS on the Infotainment System: Press SETUP, VEHICLE, DRIVER ASSISTANCE, DRIVING CONVENIENCE and SMART CRUISE CONTROL. Here, you can select BASED ON DRIVING STYLE and you can set the vehicle distance, acceleration, and reaction speed. To adjust the WARNING METHOD settings for driver assistance systems, under DRIVER ASSISTANCE, select the speaker icon or WARNING METHOD. Here you can change the WARNING VOLUME, which may change the warning volume for other driver assistance systems as well. Selecting “Haptic Warning” activates the steering wheel vibration warning on certain driver assistance systems. “Lane Safety Audible Warning Off” turns off the audible warning for Lane Safety features. “Driving Safety Priority” lowers all other audio volume when the Driving Safety system sounds a warning and Parking Safety Priority, also lowers all other volume when the Parking Assist view is active. For additional information, refer to your Owner’s Manual. You can also go to the Kia Features and Functions Videos YouTube channel or the Kia Features and Functions Quick Reference Guide. Thanks for watching.