У нас вы можете посмотреть бесплатно STEAMPUNK HOTCHKISS 1879 IN 22LR: EURICA ! FLIGHT BY WIRE или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
Last night I dreamed of the solution now to connect my trigger with one at a time bullet feeing system. I used music wire I have to make springs. I have had an epiphany to make the link trigger- dosimeter arm. I could use a bit thicker, wire, have enough room, but run out of it. Used a bit thinner. The most important timing tuning of the system was following: The trigger and the sear and the bullet feeder move when the bolt is closed. If the dosimeter is opening like a valve when bolt is opening- the fountain of the bullets will fly out . Therefore. The pull of the trigger to release the sear or their cocking motion should only be in the 1t half of the travel. The second half reserved for one bullet release from the magazine When shooter pulls the trigger all the way during the shot- at the end of travel the feeder will release one bullet underneath of the closed bolt waiting for the opening to pop out. It happens automatically as we typically pull hard with the recoil. The cocking does not interfere with the dosimeter opening even though the trigger moves[ 1t half of the travel]. I believe it came out pretty good. I still need to polish the arm of the dosimeter so it allows the 2 d round in t(e Magazine to slide freely up to the rim ( ~ 3/16 “ travel) and put the pressure = robustly kick out the bullet #1 from under the bolt into the receiver/ ramp. Thanks for watching