I Fixed The Purge Problem For Bambu Lab P1S & X1C With Code! Chute Tapping Explained скачать в хорошем качестве

I Fixed The Purge Problem For Bambu Lab P1S & X1C With Code! Chute Tapping Explained

In this video, I demonstrate how Chute Tapping works to help with purges sticking inside the purge chute that can cause buildup leading to print failures. Up until now, foil tape has been the only inexpensive solution but its looks.. not so great and leaves residue behind when removed after being installed for a long time. Chute tapping, which is an option within SteinWipe Motion Control, can be enabled by adding the SteinSwitch Definition for it to the printer notes in the machine settings within Bambu Studio. The idea is to use the toolhead to move to the front of the purge chute of the X1C or P1S printers, and move into the chute on the Y axis causing the chute flap to tap the chute wall and it's this motion which is very effective at knocking the purge down if it is stuck. Try the MakerWorld release of SteinWipe https://makerworld.com/en/models/1025... SteinWipe Dev.Pack containing this Chute Tapping Mod https://www.patreon.com/Leckiestein/s... Try the MakerWorld release of SteinTrack https://makerworld.com/en/models/1442...