Install Nissan Juke Footwell Lights and a Switch скачать в хорошем качестве

Install Nissan Juke Footwell Lights and a Switch

LED Roll: https://amzn.to/2UETaFr Check out my amazon shop, periodically adding deals and products https://www.amazon.com/shop/thekmz1 Watch my other video on the trunk lighting:    • Install Nissan Juke Trunk Lighting   In this video i address a few things i had questions about, and i hope someone finds this video helpful. At the end of the video i have provided my wiring diagram on how i hooked them up. The LED's were self adhesive and i bought them for $6.50 off of ebay. Typically they are only $15 for a 16 foot roll (5 Meters). I bought a switch that would fit into one of the blank switch ports on the juke. This made a cleaner look and i didn't have to ruin/drill a hole in the blank switch port just in case i want to put it back to stock. Another question i had was how to take out the blank switch port. You will HAVE to pull the big plastic piece under the steering wheel towards you. There are metal clips that hold it in place to you have to be somewhat aggressive with it. I only removed enough that i could get my hand in there and push down a tab at the top to push it in. The blank switch will have to be removed by pushing it inside, not pulling it out. The new switch however, can be put in from the outside by pushing it into the slot. If you ever need to get it out, you will most likely need to remove this large plastic piece under the steering wheel again, to push down the tabs that hold it in place. Here is the switch link: http://www.ebay.com/itm/310879552724?... The height of the switch is 1.65", width .68", depth .95" Wiring from the passenger side was snaked though a small opening by your feet. Use a coat hanger, stick it though, tape your wires to it and pull it back carefully. That will work best. If you have any questions please ask me and i will try to help out. Like, comment and subscribe for more!