The Morso NF Notch Cutting Machine cutting glazing beads / face frames скачать в хорошем качестве

The Morso NF Notch Cutting Machine cutting glazing beads / face frames

The MORSO NFL is a heavy-duty, foot pedal operated notching machine used in the manufacturing process for beaded face-frames, French mitered cabinet doors as well as muntin and mullion joints. This manual model will accept moulding up to 2 3/4″ wide, allowing the operator to process virtually every face frame, including wide bottom and top rails. The machine features a heavy-duty steel frame with cast iron tabletop. The vertical travel of the cutting head, which is also made of cast-iron, can be adjusted according to the workpiece thickness. This provides comfortable operation. Operation of the MORSO NFL Manual Notching Machine: Notching Operation (stiles) Upon adjusting the cock-bead stops to set the notching depth, the moulding is placed on the machine table and one end is rested against a flip-stop. The hand lever in front is used to move the cutting head horizontally to and from the operator. Depending on the width of the cut, the thickness and hardness of the moulding, two to four cuts are made to complete the notch. This process takes only seconds and the resulting cuts are smooth and free of tear-out.