Extreme Acid Wash the Bio-Dex Way: See the Awesome Results! скачать в хорошем качестве

Extreme Acid Wash the Bio-Dex Way: See the Awesome Results!

An Acid Wash is a great way to renew your pool’s overall look without re-plastering it. The acid mix will take off a layer of the plaster and if done correctly with the right mixture, it will also remove 95% of the metal stains and another staining. That is one reason I use Bio-Dex products when I do my Acid Washes. Their products actually do what they say, and you can see the stains coming right off the surface of the pool. The Acid Wash mix is the most important element of Acid Wash. Here are the products that you need for a successful acid wash. You will need 31.45% Muriatic Acid mixed with water in a 2 to 1 water to acid mix. Bio-Dex Plaster White ‘n Brite to help thicken up the acid solution so that it runs smoothly down the walls of the pool and to reduce the acid fumes. Bio-Dex AquaDex 50 Stain-Off which helps to remove iron and another metal staining from the surface. If you use this Acid Wash mix you will have great results and the plaster or Pebble Tec will look as good as new! You can prep the pool to remove some of the calcium build up on the tile with the Bio-Dex Protect-All-Supreme which will require you to raise the water level over the pool tile calcium line, pour in 1 or 2 gallons of the Protect-All-Supreme into the pool and then run the pool for 24-48 hours. In most cases, this is probably not something that most customers will opt to do since almost all of the acid washes I have done were in pools that needed to be drained straight away. But it is a part of the treatment and something that you can do as the first step. Here are the detailed instructions from Bio-Dex on how to do an Acid Wash the Bio-Dex way: https://drive.google.com/open?id=1DyS... Acid Wash Tips: Always wear protective gear as the fumes and acid are hazardous. The first thing you should know when you go to do an Acid Wash is that the results cannot be predicted. I can look at a pool now and pretty much predict the outcome. But each pool is different, and results vary. You only want to Acid Wash a pool if the entire plaster or Pebble Tec is intact. This means no cracks or chips are present. And acid wash will make the chipping even worse so if the surface is full of cracks and holes in the plaster, I would pass on Acid Wash and move straight to resurfacing it. You also do not want to drain and Acid Wash a pool if the air temperature is over 90 degrees as the surface can be damaged by the extreme heat exposure. Nor do you want to leave the pool drained for more than one day in hot weather. You also do not want to drain a pool when the water table is high- basically, if you have 3-6 inches of rain coming your way, do not drain a pool as it could potentially pop-out. You also don’t want to drain the water into an area around the pool. The ground can absorb the water, and this can also create a situation where the pool can pop-out. This is rare and something you really don’t need to worry about. You of course only want to Acid Wash a plaster of Pebble Tec pool and never acid wash a Fiberglass pool. If the pool has heavy calcium staining on the surface, organic and metal staining can be trapped under the calcium. You can check for calcium before draining the pool simply by feeling the pool surface. The basin in the deep end is very critical. I always add Soda Ash to the basin and leave the Sump Pump (Submersible Pump) running so that the acid running off the walls does not pool up and stain the plaster. If this happens, once the pool is filled you will see a discolored ring around the deep end of the pool. So, keep the basin filled with Soda Ash or Baking Soda to neutralize the acid as it runs into the deep end basin and out through the Sump Pump. Visit my Website: http://www.swimmingpoollearning.com/ eBook: https://www.swimmingpoollearning.com/... YouTube Video Index: http://pool mandave.blogspot.com/2014/03/swimming-pool-tips-reviews-how-to-video.html – A list of all of my videos. YouTube:    / @spl   Visit my Website: http://www.swimmingpoollearning.com/ eBook: https://www.swimmingpoollearning.com/... Join me on Patreon:   / poolguycoaching   Podcast: http://www.buzzsprout.com/110832 Shop INYO Pools: http://www.inyopools.com/?utm_source=... "Inyopools.com has been helping pool owners find the right pool parts since 2001. With over 50,000 pool parts in stock, order online today and have your parts delivered right to your door." Jobber: https://getjobber.com/im/pool/ “Jobber is your business’s command center. The easy to use app powers your sales, operations, and customer service, all in one place. Check the description below to Save 20% off your first 6 months. Jobber's field service scheduling software and the app is the best way to organize your service business. Quote, schedule, invoice, and get paid—all in one place.”