Training: How to Machine Polish Fiber Optic Connectors скачать в хорошем качестве

Training: How to Machine Polish Fiber Optic Connectors

see more at: https://focenter.com/fiber-optic-poli... Transcript: After denubbing the fiber, the connectors are ready for polishing. A production environment uses a machine, or an automated polishing machine, for polishing more than 12 or more connectors at a time. A couple of things to consider when choosing a high-volume production polisher is to select a machine with a high level of workmanship, the platen should move in an orbital motion to help create or maintain a spherical end face to that connector. It should have precise pressure control of the polishing plate that will make contact with that platen, in case you want to fine tune and refine your processes based on a certain set of industry standards or geometries that you may need to meet. The polishing fixture needs to be of high precision and maintain a high level of perpendicularity with respect to the grinding surface. Here is a Domaille 5200 polishing platform, with an 18-position plate. Here we are finishing, snapping in the final connectors to the plate. It’s important to verify that all the connectors are protruding out from the bottom of the plate at the same level. You can see this model has a couple of different loading mechanisms, the 45-degree angle is used to load the connectors into position, a cleaning position, and finally, the polishing position....