Ford Escape Front Bumper Cover Removal: HOW TO ESCAPE скачать в хорошем качестве

Ford Escape Front Bumper Cover Removal: HOW TO ESCAPE

This front bumper cover removal is a required procedure for replacing many things on the front of your 2013+ Ford Escape... it's a "slow and steady wins the race" type video, but certainly not impossible, even for a novice. Just takes some patience. AMAZON LINKS: ***White wheel well fender/ molding clips: https://amzn.to/3urdjgM ***Front bumper cover (primed, not painted) WITHOUT holes for parking sensors: https://amzn.to/3kWPn1E ***Front bumper cover (primed, not painted) WITH holes for parking sensors: https://amzn.to/3usU8Df ***LH/ RH front bumper cover inserts (matte black- S, SE, and some SEL): https://amzn.to/3kT2cdg ***Lower front bumper cover insert - where license plate mounts (matte black - S, SE, and some SEL): https://amzn.to/3kWPn1E ***Lower front bumper cover valence - connects lower bumper cover to subframe and ties into wheel well liners: https://amzn.to/3oAE0yT CHAPTERS BELOW: STEP 0: Intro (00:00) STEP 1: Raise vehicle on jack stands / remove splash shield STEP 2: Remove Wheel Well Molding Panels (1:29) STEP 3: Separate Wheel Well Liners from Front Bumper Cover (3:00) STEP 4: Remove QTY 3 x T30 torx screws from lower bumper cover support (3:19) STEP 5: Remove Hood Latch and Plastic Radiator Cover (3:55) STEP 6: Remove Upper Bumper Cover Fasteners (4:37) STEP 7: Remove QTY 6 x Stud Fasteners securing Upper Bumper Cover (4:58) STEP 8: Disconnect Front Bumper Cover Wire Harness (6:25) STEP 9: Release All Remaining Plastic Retainers holding Bumper Cover (6:52) STEP 10: Remove the Front Bumper Cover (7:29) TIPS 1-4: Bumper Tips (8:06) STEP 11: Reassembly Notes (9:57) These Escapes aren't the easiest to work on, and there are a lot of critical items accessible by removing the front bumper cover. As for the removal, there aren't a lot of comprehensive step by step videos out there to do this, so we thought we'd make one. Reasons to remove the front bumper include (but aren't limited to): Accessing fog lights Accessing radiator Accessing horn Replacing Headlights Accessing wiper fluid tank and pump more... NOTES: Pay attention to the tips for reinstalling the bumper. Those white clips for the wheel well moldings break easily (know from experience)... go slow with your trim tools and save as many as you can. If you need more white fender molding clips or materials, see our storefront link: https://www.amazon.com/shop/howtoesca... Video Links: Getting Jack Stands Set Up:    • Jack and Lift Locations: HOW TO ESCAPE   Removing Your Splash Shield (T30 Torx Screws...See Oil Change Video):    • 2013 Ford Escape Oil Change and Reset...   TOOLS NEEDED: 7mm socket 8mm socket 10mm socket Socket wrench, extension, (U-joint optional) Power drill with socket adapter to speed things up Plastic Trim / Pry Tools Philips Driver Flathead Driver Jack Stands / Floor Jack or Scissor Jack / Wheel Chock ste- T30 Torx Driver TORQUE SPECS: (updating soon) Please LIKE, SHARE, and SUBSCRIBE! Let us know if you have any questions #howtoescapewithrahrena #rahrena #2013fordescape #2014fordescape #2015fordescape #2016fordescape #diy #fordescape #bumpercoverremoval #howtoremoveyourbumpercover #howto #ford #howtoremoveabumpercover #diybumpercoverremoval #rahrenaapp