Husqvarna Automower wheel motor disassembly, greasing and bearings change скачать в хорошем качестве

Husqvarna Automower wheel motor disassembly, greasing and bearings change

This tutorial applies to Automowers manufactured from 2016. Tools used: T20 Torx screwdriver Philips screwdriver PH1 and PH2 Ratchet wrench or drive handle Round file Torque screwdriver (accuracy at least one decimal place) Puller Outer circlip pliers Inner bearing puller for 8 mm inner diameter ball bearing Inner circlip pliers Hydraulic press, vise or a big hammer Bench grinder 12 point 19 mm socket 16 mm milling cutter Punch Parts used: Wheel motor original ball bearings are 698ZZ (8 (ID) x 19 (OD) x 6 (Width) mm), if changed use 698RS or 6982RS, because they have better moisture resistance. Original oil seal (8 (ID) x 15.5 (OD) x 3 (Width) mm), replace with (8 (ID) x 16 (OD) x 3 (Width) mm) Lubricants used: ADDINOL Multi-purpose Grease L 2 MO NLGI 2 Silicone grease NLGI 2 Soaking liquid: White spirit (mineral spirit) Price for one wheel motor gears regreasing is 20 € (VAT included). Price for one wheel motor gears regreasing and two outer bearings change is 40 € (VAT included). Wheel motor rebuild kits and spare parts can be ordered here: https://shop.klipparservice.se/en